Yamaha XT660Z 2008 Service Manual page 233

NOTE:
• Install the pull lever with the "UP" mark facing
up.
• Align the punch mark "a" on the pull lever with
the punch mark "b" on the clutch cover.
• Install the pull lever spring "1" as shown.
2
9. Install:
• Clutch cable "1"
10.Check:
• Clutch cable length "a"
Out of specification → Adjust.
NOTE:
• Push the pull lever in direction "b" and check
the cable length "a".
• Bend the tab "c" on the pull lever to secure the
clutch cable.
Clutch cable length
65.6-73.9 mm (2.58-2.91 in)
1
c
b
11.Adjust:
• Clutch cable length
NOTE:
Move the pull lever a notch until the cable
length is within specification.
1
a
b
a
5-39
12.Adjust:
• Clutch cable free play
Refer to "ADJUSTING THE CLUTCH CA-
BLE FREE PLAY" on page 3-11.
CLUTCH