Table of Contents
Advertisement
SAS to SAS/SATA RAID Subsystem
5.3.2 Create Raid 30/50/60
To create a Raid30/50/60 Volume Set, move the mouse cursor to the main menu and
click on the Create Raid30/50/60 link. The Select Multiple RaidSet For
Raid30/50/60 screen will show all R aid S ets. Tick on t h e R aid Sets that you want
to include in the creation and then click on the Submit button.
NOTE: Maximum of 8 Raid Sets is supported. All Raid Sets must
contain the same number of disk drives.
Configure the Volume Set attributes (refer to previous section for the Volume Set
attributes). When done, tick Confirm The Operation and click on Submit button.
60
User Manual
Advertisement
Table of Contents
