Table of Contents
Advertisement
Check Volume Set Options:
Scrub Bad Block If Bad Block Found, Assume Parity Data is Good
Re-compute Parity if Parity Error, Assume Data is Good
NOTE: When the 2 options are not selected, it will only check
for errors. It is recommended to perform Check Volume Set
with the 2 options unselected at first. If the result shows error,
the two options can be selected and redo Check Volume Set to
correct the errors.
3. Tick on Confirm The Operation and click on the Submit button. The Checking
process will be started.
The checking percentage can also be viewed by clicking on RaidSet Hierarchy in the
Information menu.
5.3.6 Schedule Volume Check
To perform Check Volume Set by schedule, follow these steps:
1. Click on the Schedule Volume Check link.
2. Select the desired schedule that you wish the Check Volume Set function to run.
Tick on Confirm The Operation and click on the Submit button.
Scheduler: Disabled, 1Day (For Testing), 1Week, 2Weeks, 3Weeks, 4Weeks, 8Weeks,
12Weeks, 16Weeks, 20Weeks and 24Weeks.
Check After System Idle: No, 1 Minute, 3 Minutes, 5 Minutes, 10 Minutes, 15 Minutes,
20 Minutes, 30 Minutes, 45Minutes and 60 Minutes.
SAS to SAS/SATA RAID Subsystem
User Manual
65
Advertisement
Table of Contents
