Table of Contents
Advertisement
Upgrading Firmware Through Telnet
NOTE: This example uses CRT terminal emulation program.
For easier upgrade procedure, it is recommended to use web
browser-based firmware upgrade.
1. To connect to RAID subsystem using Telnet, open Terminal Emulation program
(example, CRT 6.1) Refer to Section 4.1 for sample step to enable Telnet connection
via CRT program.
2. After successful connection, select Raid System Function menu. The Password box
will be shown. Enter the password (default is 00000000) to login.
3. After login to Raid System Function menu, select Update Firmware. Then choose
"Transfer" menu and select "Zmodem Upload List...".
SAS to SAS/SATA RAID Subsystem
User Manual
93
Advertisement
Table of Contents
