Preparing The Jbod And Connecting To Raid Subsystem; Preparing The Jbod And Connecting To Sas Hba In Host System - Unifosa Proware EP-4646JD-SCSC User Manual

64 Bays SAS to SAS/SATA JBOD Subsystem

3.3 Preparing the JBOD and Connecting to RAID Subsystem

1. Install the disk drives, if not yet installed. Refer to Section 2.5 Disk Drive
Installation for detailed information.
2. Connect one end of SAS cable to the SAS In Port of the JBOD subsystem
enclosure and the other end to the SAS Expansion Port of the RAID subsystem
enclosure.

3.4 Preparing the JBOD and Connecting to SAS HBA in Host System

1. Install the disk drives, if not yet installed. Refer to Section 2.5 Disk Drive
Installation for detailed information.
2. Connect one end of SAS cable to the SAS In Port of the JBOD subsystem
enclosure and the other end to the SAS HBA on the Host system.
38 User Manual