Unifosa Proware ep-2123-s6s6 User Manual page 54

SAS to SAS/SATA RAID Subsystem
When can the "Activate Incomplete RAID Set" function be used?
In order to access the Volume Set and corresponding data, use the Activate
Incomplete RAID Set function to active the Raid Set. After selecting this
function, the Raid State will change to "Degraded" state.
To activate the incomplete the Raid Set, click on the Activate Incomplete RAID
Set link. A "Select The Raid Set To Activate" screen is displayed showing all existing Raid
Sets in the subsystem. Select the Raid Set with "Incomplete" state which you want to
activate in the Select column.
Click on the Submit button to activate the Raid Set. The Volume Set(s) associated
with the Raid Set will become accessible in "Degraded" mode.
NOTE: The "Activate Incomplete RAID Set" function is only used
when Raid Set State is "Incomplete". It cannot be used when Raid
Set configuration is lost. In case Raid Set configuration is lost,
contact your vendor for support.
54 User Manual