Table of Contents
Advertisement
SAS to SAS/SATA RAID Subsystem
5.4.5 Identify Selected Drive
Use this option to physically locate a selected drive to prevent removing the wrong drive.
When a disk drive is selected using the Identify Drive function, the Status LED of the
selected disk drive will be blinking Red.
To identify a selected drive from the drives pool, click on the Identify Drive link. The
"Select The IDE Device For identification" screen appears. Tick on the IDE device from the
drives list. After completing the selection, click on the Submit button to identify
selected drive.
72
User Manual
Advertisement
Table of Contents
