SAS to SAS/SATA RAID Subsystem
4.2 Configuration through the LCD Panel
All configurations can be performed through the LCD Display front panel function keys,
except for the "Firmware update". The LCD provides a system of screens with areas for
information, status indication, or menus. The LCD screen displays menu items or other
information up to two lines at a time. The RAID controller's factory default password is
set to 00000000.
Function Key Definitions
The four function keys at side of the front panel perform the following functions:
Parts
Up and Down
Arrow buttons
Select button
Exit button
36
User Manual
Use the Up or Down arrow keys to go through the
information on the LCD screen. This is also used to
move between each menu when you configure the
subsystem.
This is used to enter the option you have selected.
Press this button to return to the previous menu.
EXIT
NOTE: This button can also be used to reset the
alarm beeper.
Function