Table of Contents
Advertisement
SAS to SAS/SATA RAID Subsystem
Main Menu
The main menu shows all function that enables the customer to execute actions by
clicking on the appropriate link.
NOTE: The password option allows user to set or clear the
RA ID subsystem's password protection feature. Once the
password has been set, the user can only monitor and configure
the RAID subsystem by providing the correct password. The
password is used to protect the RAID subsystem from
unauthorized access. The controller will check the password only
when entering the Main menu from the initial screen. The RAID
subsystem will automatically go back to the initial screen when
it does not receive any command in twenty seconds. The RAID
subsystem's factory default password is set to 00000000.
34
User Manual
Advertisement
Table of Contents
