Chapter 4 RAID Configuration Utility Options
Configuration Methods
There are t h r e e methods of configuring the RAID controller:
a. Front panel touch-control buttons
b. Web browser-based remote RAID management via the R-Link Ethernet port
c. Telnet connection via the R-Link Ethernet port
NOTE: The RAID subsystem allows you to access using only one
method at a time. You cannot use more than one method at the
same time.
4.1 Configuration through Telnet
NOTE: This example uses CRT terminal emulation program. You
can also use Windows Hyper terminal as another option.
1. To connect to RAID subsystem using Telnet, open Terminal Emulation program
(example, CRT 6.1) and start new session, and select Telnet protocol. Click "Next".
SAS to SAS/SATA RAID Subsystem
User Manual
31