Unifosa Proware ep-2123-s6s6 User Manual page 59

Sas to sas/sata raid subsystem
Table of Contents

Advertisement

takes longer. No Init (To Rescue Volume) is used to create a Volume Set without
initialization; normally used to recreate Volume Set configuration to recover data.
Stripe Size:
This parameter sets the size of the stripe written to each disk in a RAID 0, 1, 10, 5
or 6 Volume Set. You can set the stripe size to 4 KB, 8 KB, 16 KB, 32 KB, 64 KB,
or 128 KB.
A larger stripe size produces better-read performance, especially if your computer
does mostly sequential reads. However, if you are sure that your computer does
random reads more often, select a small stripe size.
NOTE Stripe Size in RAID level 3 can't be modified.
Cache Mode:
The RAID subsystem supports two types of write caching: Write-Through and Write-
Back.
Write-Through: data are both written to the cache and the disk(s) before the
write I/O is acknowledged as complete.
Write-Back: when data is written to cache, the I/O is acknowledged as complete,
and some time later, the cached data is written or flushed to the disk(s). This
provides better performance but requires a battery module support for the
cache memory, or a UPS for the subsystem.
Tagged Command Queuing:
When this option is enabled, it enhances the overall system performance under
multi-tasking operating systems by reordering tasks or requests in the command
queue of the RAID system. This function should normally remain enabled.
SAS Port/LUN Base/LUN:
SAS Port: Each RAID controller has two 6Gbps SAS Host Channels (ports) . Select
the SAS port where to map the LUN (Volume Set). Options are: 0, 1 and 0&1
Cluster. 0&1 Cluster will make the LUN visible on both SAS ports.
LUN Base: T h e b ase LUN number. Each LUN Base supports 8 LUNs.
LUN: Each Volume Set must be assigned a unique LUN ID number. A SAS Port can
connect up to 128 devices (LUN ID: 0 to 127). Select the LUN ID for the
Volume Set.
Volumes To Be Created: Use this option to create several Volume Sets with the same
Volume Set attributes. Up to 128 Volume Sets can be created.
SAS to SAS/SATA RAID Subsystem
User Manual
59

Advertisement

Table of Contents
loading

Table of Contents