Table of Contents
Advertisement
5.2 RAID Set Functions
Use the Raid Set Function and Volume Set Function if you prefer to create customized
Raid Sets and Volume Sets. User can manually configure and take full control of the
Raid Set settings, but it will take a little longer to setup than the Quick Create
configuration. Select the Raid Set Function to manually configure the Raid Set for the
first time or t o delete existing Raid Set and reconfigure a R aid Set.
5.2.1 Create RAID Set
To create a Raid S et, click on the Create RAID Set link. A "Select The Drives
For RAID Set" screen is displayed showing the disk drives in the system. T i c k t h e
b o x o f e a c h d i s k d r i v e t h a t w i l l b e i n c l u d e d i n Raid Set to be created. Enter
the preferred Raid Set Name (1 to 16 alphanumeric characters) to define a unique
identifier for the Raid Set. The default Raid Set name will always appear as Raid Set
# xxx.
Tick on the Confirm The Operation option and click on the Submit button in the
screen.
SAS to SAS/SATA RAID Subsystem
User Manual
47
Advertisement
Table of Contents
