Unifosa Proware ep-2123-s6s6 User Manual page 29

SAS to SAS/SATA RAID Subsystem
4. Place the hard drive in the disk tray. Turn the disk tray upside down. Align the
four screw holes of the SAS disk drive in the four Hole A of the disk tray. To
secure the disk drive into the disk tray, tighten four screws on these holes of the
disk tray. Note in the picture below where the screws should be placed in the disk
tray holes.
Tray Hole A
NOTE: All the disk tray holes are labelled accordingly.
User Manual 29