Table of Contents
Advertisement
2.1.1.2 Smart Panel
Smart Function Keys
PARTS
Up and Down
Arrow buttons
Select button
Exit button
EXIT
Environment Status LEDs
Parts
Power LED
Power Fail LED
Fan Fail LED
Over Temperature LED
Voltage Warning LED
Activity LED
Use the Up or Down arrow keys to go through the
information on the LCD screen. This is also used to
move between each menu when you configure the
subsystem.
This is used to enter the option you have selected.
Press this button to return to the previous menu.
NOTE: This button can also be used to reset the
alarm beeper.
Function
Green LED indicates power is ON.
If a redundant power supply unit fails, this
LED will turn to RED and alarm will sound.
When a fan fails or the fan's rotational speed
is below 700RPM, this LED will turn red and
an alarm will sound.
If temperature irregularities in the system
occurs (HDD slot temperature over 65°C,
Controller temperature over 70°C or CPU
temperature over 90°C), this LED will turn
RED and alarm will sound.
An alarm will sound warning of a voltage
abnormality and this LED will turn red.
This LED will blink blue when the RAID
subsystem is busy or active.
SAS to SAS/SATA RAID Subsystem
FUNCTION
User Manual
21
Advertisement
Table of Contents
