Table of Contents
Advertisement
B. Replacing Power Supply Fan Module with Plate Cover
When replacing a failed power supply fan module (PSFM) with Plate Cover, please follow
these steps:
1. Turn off the Power On/Off Switch of the failed PSFM.
2. Disconnect the power cord from the AC Inlet Plug of PSFM.
3. Loosen thumbscrews of the failed PSFM.
4. Pull out the defective PSFM.
5. Insert the PSFM Plate Cover carefully.
SAS to SAS/SATA RAID Subsystem
User Manual
101
Advertisement
Table of Contents
