Display Messages; User Prompts And Condition Messages - Datamax M-Class Operator's Manual

5.2 Display Messages

The printer displays several different types of information (if not in the menu system or Quick Test Mode):
User Prompts and Condition Messages (also see Section 5.1.1 for a listing of the Enter/Exit Prompts)
Application and Boot Loader Updating Messages (see Section 6.8)
Fault and Warning Messages (see Section 7.1)

5.2.1 User Prompts and Condition Messages

User Prompts alert the operator to a required action. Condition Messages are used to indicate an operational state.
Displayed Message
!
The printer is trying to clear a fault
!!
DMFBSJOH!GBVMUT!
condition.
!
!
A media calibration is being
!
DBMJCSBUJOH!
performed.
!
The CANCEL or TEST Key was
DBODFM!SFQSJOU@!
!
FOUFS!LFZ!>!ZFT
pressed during the fault handling
process.
!
!
The CANCEL or TEST Key was
DBODFM!CBUDI@!
!
FOUFS!LFZ!>!ZFT
pressed during a batch job.
!
!
!
QBVTFE!
M-Class
User Prompts and Condition Messages
Description
The printer is paused or offline.
Condition(s)
Occurs when the FEED Key is pressed after the
correction of a fault.
The FEED Key was pressed and held.
The faulted label will be cancelled if ENTER is pressed,
then the remaining labels in the batch will be printed.
The current print batch will be cancelled if ENTER is
pressed; the remaining labels will not be printed.
The printer is in a paused condition.
61