Table of Contents
Advertisement
PRINTHEAD CLEANING
CLEAN HEAD SCHEDULE
000 in. (* 1000)
CLEAN HEAD COUNTER
0 in.
RESET COUNTER
CLEAN HEAD NOW
M-Class
Controls the printhead cleaning routine.
Specifies the inch (or centimeter) count to reach before prompting a printhead
cleaning. If the number specified is exceeded three times, the printer will fault until
cleaning is initiated.
Notes: The default value (zero) disables this function. Also, the number specified is multiplied by one
thousand.
Indicates the number of inches (or centimeters) since printhead cleaning was last
initiated.
Allows the clean head counter to be set to zero
Initiates printhead cleaning and resets the Clean Head Counter.
Notes:
Remove ribbon, if installed.
Enter Menu Mode / Media Settings / Media Type and set the printer for Direct Thermal.
Ensure that full width media is installed.
See Section 6.1 for detailed instructions.
45
Advertisement
Table of Contents
