Datamax M-Class Operator's Manual page 125

Configuration Using a Static IP Address
Once the Ethernet Print Sever has been installed, p
the printer's power switch 'On'.
1. Verify the printer is in the 'Ready Mode'
2. Press the button to enter the printer's menu.
MENU
3. Using the button scroll to
FWD
press the button.
4. Using the button scroll to
FWD
button.
5. Using the button scroll to
FWD
button.
6. Using the button scroll to
FWD
button.
7. Press the button once to return to the
menu level. Then use the
and press the
M-Class
'COMMUNICATIONS'
'NIC ADAPTER'
'IP DISCOVERY'
'DISABLED'
'NIC ADAPTER'
button scroll to
FWD
button.
lug in the power cord, but do not connect the Ethernet cable, then turn
!
XFE!21;27B!13KVM3114!
SFBEZ!
NFOV!NPEF!
NFEJB!TFUUJOHT!
and
NFOV!NPEF!
DPNNVOJDBUJPOT!
and press the
DPNNVOJDBUJPOT!
OJD!BEBQUFS!
and press the
OJD!BEBQUFS!
JQ!EJTDPWFSZ!
and press the
JQ!EJTDPWFSZ!
+EJTBCMFE!
OJD!BEBQUFS!
JQ!BEESFTT!
'IP ADDRESS'
117