Intelix DIGI-HD-4X8 Installation Manual page 24

Intelix DIGI-HD-4X8 Installation Manual
24
1. Try a different Ethernet cable to verify the cable is operational.
2. Try connecting a computer to the network port to verify the port is
active/operational.
What is the IP address of my matrix?
Run the NetFinder software from the Intelix website. Once connected, press the
―Search‖ button, and the IP address of your unit will be displayed in the title bar
of the application.
Note: The Ping utility on a PC will verify that your matrix is
accessible on the network.
How do I assign a static IP address to my matrix?
As a DHCP enabled device, the DIGI-HD-4X8 will automatically receive an IP
address. However, control systems typically require devices to have a fixed IP
address. Setting a Static IP address must be accomplished though the matrix's
serial port. See page 18 ―Static IP‖ section for information on how to assign a
Static IP.
What is the MAC address of my matrix?
1. Run the NetFinder software from the Intelix website.
Press ―Search‖ button.
2.
Select ―Show MAC
3.
Address‖
The MAC Address will be
displayed below the IP Address
www.intelix.com