Pairing The Expand With Bluetooth Devices; Mobile Phone Pairing - Sena expand User Manual

Phone Pairing
Multipoint Pairing
Phone Selective Pairing
Media Selective Pairing
VOX Phone
VOX Intercom
VOX Sensitivity
- Set up 1 /2 / 3 / 4 / 5 or
cancel
Voice prompt
Delete All Pairings
Factory Reset
Exit Configuration
Voice Configuration Menu & Button Operations

4. PAIRING THE EXPAND WITH BLUETOOTH DEVICES

Before using the EXPAND Bluetooth headset with any of Bluetooth devices for the first time, you need to do the pairing
operation. It can be paired with Bluetooth mobile phones, Bluetooth stereo devices such as MP3, or motorcycle specific
Bluetooth GPS, and with Bluetooth adapter or transmitter such as Sena SR10 or SM10. This pairing operation is only
required once for each Bluetooth device. The headset will remain paired with the devices and automatically connects to
the paired devices again when they are within range. You will hear a high tone single beep and a voice prompt when the
headset connects to the paired device automatically: "Phone connected" to a mobile phone, "Media connected" to a
Bluetooth stereo device.

4.1 Mobile Phone Pairing

1. To enter into the voice configuration menu, press and hold the Center Button for 10 seconds until you hear a voice
prompt, "Configuration menu".
2. By tapping the (+) Button, you will hear a voice prompt, "Phone pairing".
3. Search for Bluetooth device on your mobile phone. Select the Sena EXPAND in the list of the devices detected on
the mobile phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
5. The mobile phone confirms that pairing has completed and the EXPAND is ready to use. You will hear a voice
prompt, "Your headset is paired".
None
None
None
None
Enable / disable
Enable / disable
- Enter adjustment
mode
- Save and exit
Enable / disable
Execute
Execute
Execute
7
| EXPAND