Pairing The Headset With Other Bluetooth Devices; Phone Pairing; Initially Pairing The Expand Mesh - Sena EXPAND MESH Manual

Bluetooth headset with mesh intercom

Hide thumbs Also See for EXPAND MESH:

Table of Contents

3. PAIRING THE HEADSET WITH OTHER

BLUETOOTH DEVICES

When using the headset with other Bluetooth devices for the first time,

they will need to be "paired." This enables them to recognize and

communicate with one another whenever they are within range.

The headset can pair with multiple Bluetooth devices such as a mobile

phone, MP3 player, or Sena SR10 Two-Way Radio Adapter via Mobile

Phone Pairing and Second Mobile Phone Pairing.

There are three ways to pair the phone.

The headset will automatically enter the phone pairing mode when you

initially turn on the headset or in the following situation:

• Rebooting after executing Factory Reset.

1. Press and hold the Center Button and the (+) Button for 1 second.

Note:

• The phone pairing mode lasts for 3 minutes.

• To cancel phone pairing, tap the Center Button.

Mobile

MP3

Phone

Player

HOLD

Expand Mesh Bluetooth

Sena

SR10

Blinking

"Phone pairing"

Headset with Mesh Intercom™ | 11

Table of Contents