74
Series 70 Maintenance Manual
LINEFEED MOTOR
The following illustration shows the connection circuit for the Linefeed Motor.
The resistance of each coil should be approximately 70 ohms between pads 38
and 39, 39 and 40, 37 and 36, and 36 and 35 on the Linefeed Motor.
Pins at Connection
Figure 48: Linefeed Motor Pin Assignments
Note: The circled letters refer to the respective locations marked in figure 45
Signals
Phase One
Common
Phase Three
Phase Two
Common
Phase Four
on page 71.
Pins on Linefeed Motor
3
2
1
4
5
6