Ithaca 75 User Manual page 51

Note: The following instructions describe disassembling the Journal Bucket
Assembly with the Journal Take-up Motor and gears. Some models do
not have the journal take-up option. On those models, you only need to
remove the Paper Low Switch and the Paper Supply Plates (plastic
pieces on the sides of the bucket) to disassemble the Journal Bucket
Assembly.
1. Remove the E-Clips (G) and Switch Gears (F) from the Journal Bucket
Assembly (A).
2. Remove the two screws (J) holding the Journal Take-up Motor (H) to the
Journal Bucket Assembly (A) with a #0 Phillips screwdriver.
3. Remove the nuts (D) holding the Paper Supply Plates (B, C) to the sides of
the Journal Bucket Assembly (A) with a 9/32 inch nut driver.
4. Gently pry out the Paper Low Switch (E) from the Journal Bucket
Assembly (A).
Squeeze the tabs on the Paper Low Switch (E) or insert a screwdriver under
the switch to remove it.
Note: Reverse these procedures to reassemble the Journal Bucket Assembly.
43
Disassembly