Setting The Gamma Value For Remote Scans - Canon imageRUNNER C3489 Reference Manual

2

Setting the Gamma Value for Remote Scans

4
You can set the gamma value that is used for scanning color documents into your
computer through the Network Scan function. Select a gamma value that is most
suited to your computer settings so that you can print the document from your
computer with the most optimal density.
NOTE
For more information on the Network Scan function, see the Color Network ScanGear
User's Guide.
1
2
4-60
Specifying Common Settings
Select [High Ratio], [Normal], or [Low Ratio] ➞ press [OK].
Details of each item are shown below.
[High Ratio]: A small amount of memory is used for scanning the document, but
the images have a lower image quality.
[Normal]: The amount of memory used for the document and the quality of
the images are moderate. The compression ratio is between the
High Ratio and Low Ratio settings.
[Low Ratio]: A large amount of memory is used for the document, but the
images have a higher image quality.
(Additional Functions) ➞ [Common Settings] ➞
Press
[Gamma Value for Remote Scans].
Select the gamma value ([Gamma 1.0], [Gamma 1.4], [Gamma
1.8], or [Gamma 2.2]) ➞ press [OK].