Canon imageRUNNER C3489 Reference Manual page 94

2
2-50
Making Prints Using the Stack Bypass
❑
Enter the size of the paper using the numeric keys on the touch panel display.
❑
Press [X] ➞ enter a value.
❑
Press [Y] ➞ enter a value.
❑
Press [OK].
You can also select a size key ([S1] to [S5]) containing a stored paper size
setting, instead of entering values.
The display returns to the paper size selection screen.
NOTE
•
To enter values in millimeters, press [mm].
•
For instructions on entering values in inches, see "Values in Inches," on p. 2-25.
•
If you make a mistake when entering values, press [C] on the touch panel display
➞ enter the correct values.
•
To select a registered paper size stored in a size key ([S1] to [S5]), you must store
the irregular paper size in the size key beforehand. For instructions on storing
irregular paper sizes, see "Irregular Paper Size Settings for the Stack Bypass," on
p. 4-50.
❑
Press [Next].