Canon imageRUNNER C3489 Reference Manual page 36

1
1-18
Main Power and Control Panel Power
● If login authentication by a login service (SDL or SSO) is set:
❑
The Start Up screen is displayed until the machine is ready to scan.
❑
After the Start Up screen disappears, the MEAP Start Up screen is displayed
regardless of the Set as Initial Function settings.
IMPORTANT
•
If you turn OFF the main power, wait at least 10 seconds before turning the main
power back ON. For instructions on restarting (turning the main power switch OFF
and then ON) the machine, see "Main Power and Control Panel Power," on p. 1-14.
•
Do not turn the main power OFF, if you want to send or receive I-fax documents.
Also, do not turn the main power OFF, if the optional Super G3 FAX Board or Super
G3 Multi-Line Fax Board is installed, and you want to be able to send or receive fax
documents. Sending or receiving I-fax or fax documents cannot be done when the
main power is turned OFF.
•
If SSO or SDL is set as the login service, the machine will take longer to become
ready to scan.