Finisher-Z1; Parts And Their Functions - Canon imageRUNNER C3489 Reference Manual

Finisher-Z1

The Finisher-Z1 is equipped with the following modes: Collate, Group, Offset, and
Staple. (See "Finishing Modes," on p. 3-21.)
If the optional Copy Tray-J1 is attached to the right side of the machine, prints can
be delivered to two different locations.
3
IMPORTANT
The Finisher-Z1 cannot be installed with the optional Inner 2way Tray-D1.

Parts and Their Functions

a Auxiliary Tray
If you are printing on large size paper, such as
11" x 17", LGL, or LTRR, pull out the auxiliary
tray.
b Output Tray
Paper is output to the output tray.
3-20

Finisher-Z1

a b c
c Front Cover
Open this cover to replace the staple cartridge in
the stapler unit, or to clear a staple jam. (For
instructions on replacing the staple cartridge,
see "Replacing the Staple Cartridge," on p. 7-29.
For instructions on clearing a staple jam, see
"Finisher-Z1 (Optional)," on p. 8-64.)
e
d