Canon imageRUNNER C3489 Reference Manual page 209

2
Select [Speed Priority] or [Print Side Priority] for each paper
source ➞ press [OK].
Details of each item are shown below.
[Speed Priority]: When you feed one or two-sided prints into the machine, the
method for delivering paper inside the machine changes, and
this affects the printing speed. Therefore, to maximize the
printing speed, load the paper manually as follows:
One-Sided Prints: Load the paper face up in a paper drawer, or
Two-Sided Prints: Load the paper face down in a paper drawer,
[Print Side If you load paper in a paper drawer and select [Print Side
Priority]: Priority], no matter whether you are printing one or two-sided
prints, the side of the paper facing up is always the one printed
on first. (The side facing down is the one printed on first for the
stack bypass and paper deck.) However, some speed will be
sacrificed when printing one-sided prints.
If [Print Side Priority] is selected for a paper source, and Drawer Eligibility For
APS/ADS in Common Settings (from the Additional Functions screen) is set to
'On', the Automatic Paper Selection and Automatic Drawer Switching settings are
ignored. Also, the machine's printing speed may become slower when you print
one-sided documents.
face down into the stack bypass and the
optional paper deck. The side facing up in
the paper drawer, and the side facing down
in the stack bypass and paper deck are the
sides printed on.
or face up in the stack bypass and the paper
deck. The side facing down in the paper
drawer, and the side facing up in the stack
bypass and paper deck are the first sides
that are printed on.
Specifying Common Settings
4
4-53