Setting System Monitor Screen Restrictions
You can set restrictions relating to the System Monitor screen.
IMPORTANT
•
To access [User Management/Settings] from the SDL, set USE HTTP to 'On'.
•
To manage user information for the Local Device Authentication system of SSO, set USE
HTTP to 'On'.
•
To change the SSO user authentication system to Domain Authentication, Domain
Authentication + Local Device Authentication, or Local Device Authentication, set USE
HTTP to 'On'.
•
Use the Remote UI, set USE HTTP to 'On'.
Restricting Access to the System Monitor Screen
If you are using a login service, you can restrict access to the System Monitor
screen.
1
Press
[System Monitor Screen Restriction] ➞ [Display Status Before
Authentication].
2
Select [On] or [Off] ➞ press [OK].
If the Display Status Before Authentication mode is set to 'Off':
: Displayed
Department ID Management
or Log in Service, such as
Before Logging In
After Logging In
IMPORTANT
Even if you set the Display Status Before Authentication mode to 'Off', access to
the System Monitor screen is only restricted if a login service is set.
(Additional Functions) ➞ [System Settings] ➞
: Not Displayed
SSO and SDL
Setting System Monitor Screen Restrictions
The System Monitor Screen
Print, Copy, Send, Fax,
and Receive Status
Screens
6
Device Status
Screen
6-33