Other Useful Functions; Auto Drawer Switching - Canon imageRUNNER C3489 Reference Manual

NOTE
The Auto Clear mode does not activate if Auto Clear Time is set to '0'. (See "Auto Clear
Time," on p. 4-64.)
■ A Message Board Where the Message Appears in the Job/Print Status
Display Area
2

Other Useful Functions

Other useful functions are:

■ Auto Drawer Switching

If a paper drawer runs out of paper during printing, the machine automatically locates
another paper drawer loaded with the same size paper, and begins feeding paper from
that paper drawer.
NOTE
You can set whether a paper drawer is subject to automatic paper drawer switching for
each function. The default setting is 'Off' for the stack bypass, and 'On' for the other paper
drawers. (See "Auto Paper Selection/Auto Drawer Switching," on p. 4-33.)
■ Auto Clear
If the machine is not used for a period of approximately two minutes after the last print job
or key operation is performed, the machine automatically restores the standard settings.
NOTE
You can set the Auto Clear Time from 0 to 9 minutes in one minute increments. The
default setting is '2' minutes. (See "Auto Clear Time," on p. 4-64.)
■ Job Duration Display
If you set Job Duration Display to 'On' in Common Settings (from the Additional Functions
screen), the display shows the time duration before a copy job completes.
2-18
Overview of the Color imageRUNNER C3480/C3480i/C3080/C3080i/C2550
Job/Print Status Display Area