System Settings; Screen Calibration (Accessible Via Home Button); Network Settings (Menu-> Settings -> Network); Wi-Fi Settings (Menu-> Settings -> Network Wi-Fi Tab) - ACN IRIS X User Manual

System Settings

The System Settings allows you to configure settings for Screen Calibration, Network, Time, Display, Maintenance,
Camera, Video, Call Features, Screen Saver, Background, Tones and Language. Most of the settings are located in
MENU->System Settings.

Screen Calibration (Accessible via Home Button)

It is important that the touch screen is properly calibrated to enable all its features and functions. Using the stylus will
provide the best results.
Method 1
Go to Menu –> System Settings –> Maintenance –> Factory Functions –> Touch Screen Calibration. Follow the on-
screen instructions.
Method 2
If the screen calibration is off and not responding, use this method
1. Press and hold the Home button for approximately 1 second to return to the Home screen.
2. Press and hold the Home button for 10 seconds. Upon releasing the Home button after 10 seconds, the Touch
Screen Calibration utility will be displayed. (If not displayed, repeat this process again)
3. Once the calibration screen is displayed, touch the cross hairs in each of the five locations presented on the
screen with the stylus
4. Press the Home button to complete the calibration.
Network Settings (MENU-> Settings -> Network)
ACN IRIS X supports various network connections including Ethernet and Wi-Fi connections.
•
The IRIS X displays this icon
connection.
•
The IRIS X displays this icon
You can access network settings via Menu->System Settings->Network. In the Ethernet tab, you can set the phone to
receive an IP address automatically with the DHCP or set an IP address statically. The recommended setting is the
default DHCP setting.
Wi-Fi Settings (MENU-> Settings -> Network Wi-Fi tab)
The ACN IRIS X supports 802.11b/g/n. By default, the Wi-Fi function on the phone is disabled. You can configure the
wireless settings by selecting Enable in the Wi-Fi Function. There are two methods to configure Wi-Fi.
Method 1
Scan for a Wi-Fi connection:
1. Press the Systems Setting icon on the task bar.
2. Press the Network button, and then select the Wi-Fi tab.
3. Ensure the Enable button is lit and press Apply.
4. Press the Scan button and press twice on the desired SSID (Wi-Fi network).
•
If no key is required, go to step 6.
5. Enter the appropriate key using the on-screen key pad. Make sure to click the Save Key check
box.
6. Exit back to the Home screen.
7. Press the Status Bar in the top right to access the status bar drop-down menu.
8. Press Wi-Fi to enable.
9. Press Hide to close this drop down menu.
Note: It may take 30-60 seconds for the IRIS X to connect to your network and register.
in the top right of the screen if the device is using the wired (Ethernet)
in the top right of the screen if the device is using the Wi-Fi connection.