3-Way Conference Calling (Call Options Menu); Mute (Call Options Menu); Pip Picture-In-Picture (Call Options Menu); Snap Shot - ACN IRIS X User Manual

3-Way Conference Calling (Call Options Menu)

Note: 3-Way Video Conferencing is not available at this time.
To initiate a 3-Way audio conference call, follow the steps below:
1. The conferencer initiates a call with the first party.
2. While on this call, the conferencer expands the Options menu on the IRIS X by touching the middle button of the
options icon.
3. The conferencer presses the HOLD button.
4. The conferencer presses the LINE 2 tab at the top of the screen.
5. The conferencer dials the second party they wish to conference.
6. While on this call, the conferencer again expands the options menu on the IRIS X by touching the middle button
of the Options icon.
7. The conferencer presses the CONF (Conference) button.
8. The conferencer presses YES to confirm the conference.
9. All three calls are now in a three way conference call.
•
To cancel the Conference: If after pressing the "Conference" button, you decide not to conference anyone,
press "Cancel" to cancel the conference.
•
To end the Conference: There are two ways to end a conference: The first way is to press "END" in the
conference call. The second way to end a conference is to simply hang up and terminate the call.
Key Notes:
•
If the call to the first party is a video call, the conferencer will see the first party. The first and second parties
will see the conferencer. All 3 parties will hear each other.
•
If the call to the first party is audio only, all 3 parties will hear each other without video.
•
No more than 3 parties can be conferenced together at the same time.
•
During the three way conference, if the initiator of the conference hangs up, the conference will end.

Mute (Call Options Menu)

During a call this feature turns off the phone's microphone so that the other calling party does not hear any audio
1. During a call, the screen will display Mute in the Options tool bar on the right hand side of the screen. Press the
right hand side of the screen to restore the Options tool bar if it has auto hidden. Select the button to mute the
call.
2. After the Mute button is pressed, the screen will display Unmute. When this button is pressed, the mute feature is
cancelled.

PIP Picture-In-Picture (Call Options Menu)

The PIP button can be pressed to change the video display during a call. Pressing the PIP button during a call will
change the display to one of five different views: ¾ screen called party view, full screen called party view, full screen
called party view with self view in the top right corner, ¾ screen self view and full screen self view.

Snap Shot

You can utilize the built-in camera in the ACN IRIS X to take snapshots from calls in progress.
•
To take a photo, press "Snapshot" and then the photo will be saved to folder "Snapshot" in File Manager.