Do Not Disturb (Status Bar); Call Forwarding Always Activation; Caller Id Blocking (Persistent); Additional Feature Code Functions Can Be Found In The Appendix - ACN IRIS X User Manual

Do Not Disturb (Status Bar)

With this feature enabled, all incoming calls are treated as busy (default is to forward to voice mail) without ringing or
displaying on the phone.
•
This feature is accessed by selecting the status bar on the Homepage where a number of additional options are
available. Slide the DND switch to turn on and turn off Do Not Disturb.

Call Forwarding Always Activation

Redirects all incoming calls to another telephone number without appearing or ringing on your phone
This feature is managed by a feature code. To enable and disable, enter the appropriate code below:
•
Enable: Dial *72 + Phone/Ext. Number followed by the # key. Wait for a dial tone and then hang up (dial tone
means input is successful).
•
Disable/Cancel: Dial *73 and wait for a dial tone before hanging up.

Caller ID Blocking (Persistent)

Prevents the display of your number to the called party for all calls until cancelled
This feature is managed by a feature code. To enable and disable, enter the appropriate code below:
•
Enable: Dial *31 and listen for the confirmation message
•
Disable/Cancel: Dial *32 and listen for the confirmation message

Additional Feature Code Functions can be found in the Appendix

Voice Mail

Allows callers to leave a message when you are busy or not available to take a call
Setup
1. Press the Phone Icon
2. Press the Voice Mail Icon
3. Press
4. You will be prompted to enter your password (temporary password is 1234#).
5. Follow the prompts to change your password and record your name

Retrieving Messages

You have waiting messages when the blue home button flickers and you will hear a stutter dial tone when the phone is
off-hook.
1. Press the Phone icon located at the bottom right-hand corner of the screen.
2. Press on Voice Mail button.
3. Press on Options to see the Dial Pad.
4. Enter your 4-digit access code (default is 1234) and press #.
5. Press 1 to retrieve video mail messages.
a. If you have any messages, the voice prompt will indicate whether it is a voice or video message.
6. Press 2 to set up the Busy Greeting video message.
a. Choose the type of greeting you would like and follow the prompts.
b. When you are satisfied with your message, press on the right hand side of the screen
c. Press Options then press '#' to end your recording.
7. Press 3 to set up No Answer Greeting video message.
a. Choose the type of greeting you would like and follow the prompts.
b. When you are satisfied with your message, press on the right-hand side of the screen.
c. Press Options then press '#' to end your recording.
To manage the number of rings before your voice greeting answers, simply dial *610 and respond to the prompts.
to see the Dial Pad