ACN IRIS 3000 Quick Installation Manual

1. Check for Required Items
You should already have these components:
All of the following items should be included with your ACN Videophone.
If an item is missing, please contact ACN Digital Phone Service Technical Support.
Main Unit
2.A. Installation with Router
1. Connect the handset to the connection point located on the side of your
ACN Videophone.
2. Connect one end of the Ethernet cable (RJ-45) to the WAN port of your
ACN Videophone. Connect the other end to an open Ethernet port on
your router.
3. Ensure that your computer is connected to another port on your router
or via an existing Wireless (WIFI) connection
4. Connect the Power Adapter to the Power port and then plug it into an
electrical outlet.
Note: Do not use Power Adapters from other devices.
5. Turn the Power Switch to ON on your ACN Videophone.
6. You will see a status line on your screen as your phone goes through
setup. Once this is complete, the register light on the front of your phone
will turn green, and it is ready for use.
Note: Simultaneous use of the computer and the Videophone will affect
the quality of the connection.
If you do not have a computer simply connect your ACN Videophone to
your modem or router as described in step 2.
Set-Up Diagram
Router
Phone
Socket
Cable or DSL
Modem

Changing the Display Language

After connecting your ACN Videophone for the first time you may want to change the
language setting for the display. You can select your preferred display language by
following these easy steps:
1. Press MENU and select 'Settings'.
3. Select 'Display' and scroll down to
'Language'.
Router/Cable or DSL Modem
Power Adapter
(with country specific mains adapter,
Handset
where applicable)
(requires Router with free port)
Computer
Video
3
Phone
2
1
2. Select 'System Settings'.
4. Select one of the language options.
Quick Installation Guide
High Speed Internet access
Ethernet Cable
(RJ-45)
2.B. Installation without Router
1. Connect the handset to the connection point located on the side of your
ACN Videophone.
2. Unplug the existing Ethernet cable from your computer that connects
your Cable/DSL modem to your computer. The other end of this cable
should stay attached to your modem. Connect the Ethernet cable
that you unplugged from your computer to the WAN port of your ACN
Videophone.
3. Connect one end of the new Ethernet cable (RJ-45) that came with your
Videophone, to the LAN port of the phone. Connect the other end to the
Ethernet port of your computer.
4. Connect the power adapter to the power port and then plug it into an
electrical outlet.
Note: Do not use Power Adapters from other devices.
5. Turn the Power Switch to ON on your ACN Videophone.
6. You will see a status line on your screen as your phone goes through
setup. Once this is complete, the register light on the front of your
phone will turn green, and it is ready for use.
Note: Simultaneous use of the computer and the Videophone will affect
the quality of the connection.
If you do not have a computer simply connect your ACN Videophone to
your modem or router as described in step 2.
Set-Up Diagram
Computer
Phone
Socket
Cable or DSL
Modem
3. Optional: Connecting existing/additional
phone(s) to your ACN Videophone
Connecting additional phones to your ACN Videophone
Connect one end of a phone cord to the phone port on your ACN Videophone. The
other end of the cord can connect to another phone. If you connect to a cordless
phone you can use your ACN Digital Phone Service anywhere in your home.
Videophone
Telephone Cable
(RJ-11)
3
Video
Phone
2
1