Factory Functions; Debug; Camera (Menu-> Settings -> Camera); Screen Saver (Menu-> Settings -> Screen Saver) - ACN IRIS X User Manual

Factory Functions

In page Factory Functions, the ACN IRIS X provides several testing diagnostics for the screen, camera and video, audio
and touch screen on the device. Press Start and follow the instructions on the screen for each test.

Debug

The Debug page contains the built-in debug tools for the ACN IRIS X. The debug tools make it more convenient to
diagnose issues when the system encounters problems. To start capturing traces, you need to Enable the Debug
application and press the Start button next to the Capture Packets option. To perform a network connection test, you
can enter an IP address in Network Test (Ping) to ping the destination. Press Stop to stop the operation.
Camera (MENU-> Settings -> Camera)
The camera setting under MENU->Settings->Camera allows you to modify the camera settings for the ACN IRIS X.
Settings such as Color Mode (Polychrome Mode, Monochrome Mode), White Balance (Auto, Fixed), Flicker Control (Auto,
50Hz, and 60Hz) and Lens Correction (Disable, Enable) can be configured.
Note: The default settings should be sufficient for most.
Camera Settings
Screen Saver (MENU-> Settings -> Screen Saver)
When the phone is idle, the photos will be displayed as configured in the Screen Saver. The default folder for the pictures
used in the screen saver can be accessed from Menu->Tools->File Manager->Screensaver. You can also specify the
pictures from a local/external folder by selecting Customized Folder in the Screen Saver option.
You can set the Interval (s) which defines the interval for the pictures to display in the screen saver mode. After setting the
Time Out value, the phone will start to display the pictures after the phone is unused for the specified length of time. The
phone will enter into power saving mode if the LCD Auto Power off Time is specified. Press Save for the settings to take
effect.