System Settings; Screen Calibration; Network Settings; Wi-Fi Settings - ACN IRIS X User Manual

System Settings

The System Settings allows you to configure the settings for Screen Calibration, Network,
Time, Display, Maintenance, Camera, Video, Call Features, Screen Saver, Background,
Tones and Language. Most of the settings are located in MENU >System Settings.

Screen Calibration

The ACN IRIS X Videophone touch screen can be calibrated to adjust the sensitivity for touch
input.
1. Press and hold the Home button for approximately 1 second to return to the Home
screen.
2. Press and hold the Home button for 10 seconds. Upon releasing the Home button after
the 10 seconds, the Touch Screen Calibration utility will be displayed. (If not displayed,
repeat this process again)
3. Once the calibration screen is displayed, touch the cross hairs in each of the five
locations presented on the screen with the stylus
4. Press the Home button to complete the calibration

Network Settings

The ACN IRIS X Videophone supports Ethernet and Wi-Fi connections. You can access
network settings via MENU > System Settings > Network.
In the Ethernet tab, you can set the phone to receive an IP address automatically with the
DHCP or set an IP address statically. The recommended setting is the default DHCP setting.

Wi-Fi Settings

The ACN IRIS X Videophone supports 802.11b/g/n.
By default, the Wi-Fi function on the phone is disabled. You can configure the wireless settings
by selecting Enable in the Wi-Fi Function.
There are two methods to configure Wi-Fi:
Method 1: Scan for a Wi-Fi connection:
1. Press the MENU button on the bottom right of the screen
2. Press the Settings button
3. Press the Network button
4. Press the Wi-Fi tab
5. Ensure the Enable button is lit and press Apply
6. Press the Scan button
7. Press twice on the desired ESSID