Keithley 2002 Getting Started Manual page 52

Figure 14
Trigger con-
nections using
conventional
external trig-
gering
Configure external channels
A unique measurement function can be assigned to each of the external scanner card chan-
nels. For example, DCV can be assigned to channels 1 and 2, and Ω 2 can be assigned to channels
3 and 4. Also, scanner card channels can be skipped during the scan by designating them as no
channels (---).
Perform the following steps to configure external channels:
1. Press CONFIG and then CHAN to display the CONFIGURE CHANNELS menu op-
tions.
2. Using the cursor keys (
display the number of external inputs to be scanned.
3. Use the cursor keys and the RANGE keys to display the number of channels to be
scanned and press ENTER. For example, if the scan list is going to consist of 10 chan-
nels, then set the number of external inputs to 10.
4. You will then have the opportunity to set a unique measurement function for each exter-
nal channel.
A. DEFAULT – To assign the presently selected function to all external channels, se-
B. CHOOSE-FUNCTIONS – To change function assignments, perform the following
7001 or 7002 Switch System
WARNING:
WARNING: NO INTERNAL OPERATOR SERVICABLE PARTS,SERVICE BY QUALIFIED PERSONNEL ONLY.
NO INTERNAL OPERATOR SERVICABLE PARTS,SERVICE BY QUALIFIED PERSONNEL ONLY.
MADE IN USA
CAUTION:
CAUTION: FOR CONTINUED PROTECTION AGAINST FIRE HAZARD,REPLACE FUSE WITH SAME TYPE AND RATING.
FOR CONTINUED PROTECTION AGAINST FIRE HAZARD,REPLACE FUSE WITH SAME TYPE AND RATING.
Channel
Ready
7051-2
BNC to BNC
Cables (2)
and
lect DEFAULT and press ENTER.
steps:
a. Select CHOOSE-FUNCTIONS and press ENTER. You can use RANGE keys
to check the present function assignment for each external channel.
b. To change a function assignment, use the RANGE keys to display the channel
and press ENTER.
c. For the displayed channel, place the cursor on the desired function and press
ENTER.
d. Repeat steps b and c for other channels.
Measurement Options
External
Trigger
2002 Multimeter
WARNING: WARNING:
NO INTERNAL OPERATOR SERVICABLE PARTS,SERVICE BY QUALIFIED PERSONNEL ONLY.
NO INTERNAL OPERATOR SERVICABLE PARTS,SERVICE BY QUALIFIED PERSONNEL ONLY.
External
CAUTION: CAUTION:
FOR CONTINUED PROTECTION AGAINST FIRE HAZARD,REPLACE FUSE WITH SAME TYPE AND RATING. FOR CONTINUED PROTECTION AGAINST FIRE HAZARD,REPLACE FUSE WITH SAME TYPE AND RATING.
Trigger
Input
), select EXTERNAL-INPUTS and press ENTER to
2-27
Meter
Complete
Output