Keithley 2002 Getting Started Manual page 28

Table 1
Multiple displays by function
Function Next display
All Bar graph
Zero-centered bar graph
Maximum and minimum values
Relative and actual values
Calculated and actual values (see Note 1)
Limts bar graph (see Note 1)
Adjacent channel readings (see Note 2)
DC voltage DC volts, AC ripple voltage and frequency
Positive peak spikes and highest value
Negative peak spikes and lowest value
Positive and negative peak spikes
AC voltage AC RMS voltage, frequency, and crest factor
AC RMS, average, and peak voltages
DC current (none specific to function)
AC current AC RMS (or average) current and frequency
AC RMS and average current
2-wire resistance Source current
Voltage drop across DUT
4-wire resistance Source current
Voltage drop across DUT
Lead resistance
Frequency Period calculation
Trigger level
Temperature Celsius, Fahrenheit, and Kelvin units
RTD resistance (or thermocouple voltage)
Reference junction (thermocouples only)
Data storage buffer Maximum and minimum values
Average and standard deviation
Notes:
1. Multiple displays for calculated values and limits bar graph are not available for the fre-
quency function.
2. The multiple display for adjacent channel readings is not available for the DC and AC
current functions.
Measurement Options 2-3