Keithley 2002 Getting Started Manual page 32

Table 3
Configuration settings for each measurement function
Function Speed Filter
DC Voltage
AC Voltage
2-Wire Resistance
4-Wire Resistance
DC Current
AC Current
Frequency/Period
Temperature
The 2002 allows each measurement function to be configured independently, letting you set each function as
desired. For example, if DCV is set for 7
0.1 power line cycle.
Table 4
Configuration settings for instrument operations
Option
CONFIG REL
CONFIG TRIG
CONFIG STORE
CONFIG FILTER
CONFIG MATH
CONFIG CHAN
CONFIG SCAN
CONFIG NEXT
Reso-
lution Coupling
• • •
• • •
• • •
• • •
• • •
• • •
•
• • •
Description
Set rel (relative) value and enable.
Configure measure layer, scan layer and arm layer of trig-
ger model.
Enable/disable burst mode, select data grouping, set buffer
control, configure timestamp, clear buffer, set buffer size
and select buffer feed.
Select auto, averaging, advanced or averaging-mode filter.
Select and configure math calculation; polynomial, percent
or percent deviation.
Configure unit for internal channels or external channels,
and save and restore an alternate function.
Configure scan for internal or external channels. Configure
unit for ratio or delta calculations.
Change the scale for the zero-center bar graph.
Measurement Options
Max. Units
signal (V, db, AC
level dbm) type
• •
• •
•
digits using 10 power line cycles, ACV can be set to 5
Max.
Offset auto Senso
comp. range r
•
• •
• •
•
•
digits at
2-7