Remote Control Magic Sat 2002A - Teleco Magic Sat 2002A Installation Manual

1) Connection cables to the 12V Battery
2) Connector to connect a Digital Receiver to Magic Sat 2002A
3) Connector to connect to the Magic Sat 2002A LNB
4) Connector to connect the (optional) FP3412 control extension
5) Connector to connect the Magic Sat 2002A Motor cable
6) SCART outlet for connection to VCR or DECODER units
7) SCART outlet for TV connection
8) AUDIO R-L outlets for HI-FI stereo connection
9) Connector to connect the control unit to a TV-set not equipped with any SCART outlets.
The Output channel is set to CH 21 and can be tuned to anything from 21 to 69, as you
may choose, using the remote control.
10) Connector to connect one terrestrial antenna
11) Connector to connect the MIR remote control extension (supplied).
This remote control can be used to control all the functions of Magic Sat 2002A and the
Analogue Receiver built in the Control
Main functions
increase the stereo effect. SUONO SPAZIALE (SPACE SOUND) will be displayed on

REMOTE CONTROL MAGIC SAT 2002A

Control Unit instrument is off, a horizontal line remains lit on
the display. When the receiver is switched on, the program
Analogue Receiver Program up/down
program that you wish to select.
Volume control. A value in the range 0/100 will be visible on
the TV screen at the time of operation. During this period
alterations can be made to the sound
Bass control. A value in the range -15/+15 will be visible on
the TV screen at the time of operation. During this period
alterations can be made to the sound
Treble control. A value in the range - 15/+15 will be visible on
the TV screen at the time of operation. During this period
alterations can be made to the sound
MUTE control. Press to turn off sound. The TV screen will
show AUDIO MUTO, the display will show MUT.
SPATIAL STEREO selection. By pressing this key you will
Used to directly enter the number of the
V006
Pag. 20