Important Information For Proper Antenna Pointing; Automatic Satellite Searching - Teleco Magic Sat 2002A Installation Manual

IMPORTANT INFORMATION for proper antenna pointing

1) Before performing antenna pointing, make sure you have positioned your vehicle so the
view towards the South (where Satellite signals come from) is free from any nearby
obstacle (trees, houses, etc.). This way, the antenna will be free to receive signals
coming from the satellite.
2) It is also important to know that satellites do not transmit with the same intensity
throughout Europe, so if you are outside the reception area, your Magic Sat 2002A
search might be unsuccessful. The reception areas for each Satellite can be found on
the main magazines dealing in this line of business. Also remember that the larger the
dish, the more reception area
1) Turn your TV set on and put it in a condition to receive signals coming from the satellite
receiver (See TV Manual).
2) Switch on the control unit by pressing the Red button on your remote control (or the
button on the front panel). The Magic Sat 2002A will also be automatically operated.
3) The following message will appear on your TV screen:
This message will remain until the antenna has identified the satellite. It tells you the name
of the satellite (e.g., Astra) which the Magic Sat Plus is looking for, and the programme
number (Programme 1) which will appear when pointing is over. Both these data are linked
to one another by a pre-storage on the receiver which has been performed in the factory in
the following order:
SATELLITE ASTRA 19°E
SATELLITE TELECOM 2A 8°W

AUTOMATIC SATELLITE SEARCHING

ANNELS 1 - 62
CHANNELS 80 - 90
V006
Pag. 14