User's Manual: For The Analogue Receiver Integral With The Control Unit; Control Unit Rear Panel - Teleco Magic Sat 2002A Installation Manual

If the antenna has stopped after performing pointing, but neither messages nor images
appear on the screen:
a) Is the SCART cable connected?
b) If the TV set is not connected by a SCART cable, but is connected by a COAX cable to
the TV socket, have you chosen the right programme on
If the antenna does not move when you press the Red push-button, check the
a) Are the RED and BLACK cables properly connected to the battery? The RED cable
must be on the + pole, the BLACK cable on the - pole.
b) Should you have mixed up the cables, first disconnect them, replace the safety fuse on
the bottom of the Control Unit using a similar one (10 A), then re-connect the RED and
BLACK cables properly to the battery.
c) Is the engine on your vehicle running? Turn it off, since this means the safety system
which keeps the antenna down is operating.
USER'S MANUAL: For the Analogue Receiver integral with the control
Control Unit Front Panel
1) Transparent front panel with 3-digit display and remote control sensor.
2) Channel selection keys.
3) Instrument on/off key. When the instrument is off, a horizontal line is displayed.
unit

Control Unit Rear Panel

V006
Pag. 19