Teleco Magic Sat 2002A Installation Manual page 6

Driving direction of
the vehicle
Driving direction of
the vehicle
7) Clean the lower part of the BASE PLATE carefully, applying a layer of glue on the whole
surface (e.g. SIKAFLEX)
8) Fasten the Base Plate to the roof (short side towards the driving direction of the vehicle)
and fasten the 4 fastening nuts, applying silicone in the screw holes.
9) Apply a layer of silicone all around the BASE PLATE in order to make it completely
Installation with cables led through the middle of the base
10) Connect the Grey and White cables coming from inside the vehicle (Fig. 6) to both
cables of the outside unit, making them watertight using two pieces of
THERMORETRACTILE TUBE (Fig. 7).
WARNING
While performing this operation, do not pull forcefully on the cables coming from the
middle of the outside unit, in order not to risk pulling them out.
V006
Pag. 6