Technical Features; Installation Tips - Teleco Magic Sat 2002A Installation Manual

Table of Contents

1) Working voltage: 12 VDC ± 15%

2) Consumption SEARCH operation: less than 5 A RECEPTION with Dish not moving: 240

mA approx.

3) Automatic Searching Time: min 20 sec - max 5 min, depending on the place you are at

and the battery status (if the battery is not fully charged, searching takes longer)

1) The MIR remote control Extension must be installed in such a way as to make sure that

it is always visible and that the remote control can therefore operate normally.

2) Do not install the Control Unit in an area subject to liquid spilling which could cause

irreparable damage to it.

3) Do no install the Control Unit in too small a space with poor ventilation, because

excessive heat could alter its good operation.

Base plate

Motor – Control Unit

connection cable