Table of Contents
Advertisement
1) Position the Control unit in an easy accessible, ventilated compartment.
WARNING:
Do not install the Control unit in areas where liquids can be spilled, since this could
cause irreparable damage.
Do not install the Control unit in very small, unventilated compartments, since overheating
could compromise its functionality and render the warranty null and void.
2) Place the Control panel comando in an easily accessible, visible position.
3) Install the connection cables (Grey and Black) until you reach the
OUTSIDE UNIT installation area.
Note: Install the wall-mounted control unit with the (Grey and Black) connection cables
bent as shown in the picture. This installation tip will prevent any condensation water from
flowing down the cables into your control unit electronics - damaging it beyond repair and
voiding your warranty.
8
Control Unit Installation
Control unit
Control Panel
Hide quick links:
Advertisement
Table of Contents
