Purge Unit - Canon iPF8000 series Service Manual

4.3.9 Purge Unit

a) Removing the purge unit
1) Turn off the power and move the carriage to above the platen. If the carriage is locked at its home position, insert a Phillips screwdriver from the right side into
hole [1] in the shaft of the lift unit in the purge unit and turn it counterclockwise. This will lower cap [2] and lock pin [3], allowing the carriage to be moved.
2) Remove connector [1] and three screws [2] and then remove purge unit [3].
[2]
F-4-39
[2]
[3]
F-4-40
[3]
[1]
[1]
Chapter 4
0014-8978
4-21