Chapter 4
4.2 Disassembly/Reassembly
4.2.1 Disassembly/Reassembly
See Parts Catalog for the process of disassembly and reassembly except for the following main units.
Main units are the following four units.
1.Carriage unit
2.Ink tube unit
3.Purge unit
4.Ink tank unit
The parts layout illustrations in parts catalog have figure numbers according to the disassembly procedure of the product.
Main unit disassembly and assembly flows
* Ink drainage in a dotted line performs manual or automatic either.
4-2
1. Carriage Unit Disassembly Flow
<Legend >
c: Connector h: Hook s: Screw
Printer
Automatic ink drain
Left/right circle cover (L) (h1)
Left/right circle cover (S) (h1)
Left/right side covers (s3, h2)
Upper left/upper right covers
(h1)
Rear cover right (s4)
Rear cover left (s2)
Left/right tank cover units
(s3)
Open left/right ink tank units
(s4)
Upper rear cover (s5)
Upper cover
Manual ink drain
Move the carriage to
above the platen
Left/right printheads
Left/right joint bases
Ink tube cover (s2)
Ink tube joint
Carriage PCB cover (s4)
Flexible cable (c3)
Head management sensor
(s1)
Pulley base (s3)
Lift unit (s5)
Cutter unit
Carriage unit
F-4-2
0014-8946