Canon iPF8000 series Service Manual page 270

Chapter 8
Display massage
Sheet printing is selected.
Press Load/Eject and load
sheets.
Roll printing is selected, but
sheets are loaded.
Press OK, remove the
sheets, and load a roll.
Roll printing is selected.
Press Load/Eject and load a
roll.
No Roll Feed Unit.
Turn printer off and install
roll feed unit.
The roll is empty.
Lift the release lever and
replace the roll.
Wrong paper type.
This type of paper is not
compatible with HP-GL/2.
Online: Print
Stop: Stop Printing
Load/Eject: Change Paper
Manual printing is selected,
but a roll is loaded.
Press Load/Eject and
remove the roll.
Hardware error.
03130031-2E23
Turn off printer, wait, then
turn on again.
Hardware error.
03130031-2E14
Turn off printer, wait, then
turn on again.
Hardware error.
03130031-2E16
Turn off printer, wait, then
turn on again.
Hardware error.
03130031-2E17
Turn off printer, wait, then
turn on again.
Hardware error.
03130031-2E20
Turn off printer, wait, then
turn on again.
Hardware error.
03130031-2E22
Turn off printer, wait, then
turn on again.
Hardware error.
03130031-2E23
Turn off printer, wait, then
turn on again.
Hardware error.
03130031-2E25
Turn off printer, wait, then
turn on again.
Hardware error.
03130031-2E26
Turn off printer, wait, then
turn on again.
Hardware error.
03130031-2E27
Turn off printer, wait, then
turn on again.
8-6
Code*
03860002-2E02 Data with a cut sheet specification has been received
but no cut sheets are loaded.
03860002-2E0A Data with a roll media specification has been received
when a cut sheet tray is loaded.
03060A00-2E00 Data with a roll media specification has been received
but no roll media are loaded.
03060A00-2E0E Roll media unit not installed
03060A00-2E1B Roll media end
03061000-2E15 Paper type mismatch
03061000-2E15 Non-support media of HP-GL/2
03860001-2E0C Data with a cut sheet specification has been received
when roll media are loaded.
03130031-2E23 Cutter unit failure
03130031-2F14 Writing to the ASIC register disabled
03130031-2F16 Mist fan rotation error
03130031-2F17 Platen suction fan lock detection error
03130031-2F20 Purge motor cam position error
03130031-2F22 Pump move timeout
03130031-2F23 Purge motor error
Pump inoperable
03130031-2F25 Unable to detect the carriage motor home position
03130031-2F26 Carriage inoperable
03130031-2F27 Carriage move timeout
Condition detected Action
Load cut sheets at the paper tray port.
Replace with roll media.
Load roll media.
Install the roll media unit.
Renew the supply of roll media.
Check the type of paper that can be fed and reload
the paper.
Exchange for the compatible paper to HP-GL/2
before reprinting.
Load cut sheets at the paper tray port.
Check the cutter unit and sensor.
Replace the main controller PCB
Check the mist fan.
Check the platen suction fan.
Check the purge unit.
Check the purge unit.
Check the purge unit.
Check the carriage unit. Check the linear encoder
for smears.
Check the carriage unit and surrounding parts.
Check the carriage unit and surrounding parts.