Operations; How To Use Buttons And Adjustment On The Unit; Communication Function; Additional Information - ESP Enterview 3 Operating Instructions Manual

OPERATIONS

How to use buttons & adjustment on the unit
BUTTON DESCRIPTION
Monitor ON/OFF of screen, talk through door camera
Intercom Activate an talk with the intercom
Door Door release
ADJUSTMENT
Brightness adjustment. (In off hook) After pick up the handset,
user can adjust the brightness of screen (Mode: Normal/ Brighter)
Volume adjustment. (In on hook) After placing the handset, user
can adjust the volume of sound (Mode: Normal/ Louder)
Communicating Function
Turn power switch ON. Use the slide switch for volume and brightness controls.
1. Visitor presses the "Call" button on the outside camera unit.
The monitor's speaker will sound a "chime" tone to announce that a visitor is at
the door.
2. Upon viewing the monitor's CRT screen and the visitor's image, you have two choice ;
A. You can choose to "not respond" (by not lifting the handset) The visitor's
image will disappear from the monitor's CRT screen within 30 seconds
B. You can choose to "respond" by lifting the handset and talking to the visitor as if
using a telephone. The visitor's image will remain on the CRT screen for 180
seconds, or until the handset is replaced back into the cradle.
3. After speaking with the visitor, and if you have installed an electronic door locking
system, you can push the "Open" button(
4. Press the call button( ) to call the additional monitor as an intercom.
DESCRIPTION
) to electronically unlock the door.
ADDITIONAL INFORMATION