Table of Contents
Advertisement
User Manual of DS-9600/8600/7700/7600 Series NVR
4.1 Configuring PTZ Settings
Purpose:
Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before
you control the PTZ camera.
Before you start:
Check that the PTZ and the NVR are connected properly through RS-485 interface.
Steps:
1. Enter the PTZ Settings interface.
Menu >Camera> PTZ
2. Choose the camera for PTZ setting in the Camera dropdown list.
3. Enter the parameters of the PTZ camera.
Note:
All the parameters should be exactly the same as the PTZ camera parameters.
Example: If the PTZ camera uses the protocol of Hikvision, you should select Hikvision in the PTZ Protocol
field.
4. Click Apply button to save the settings.
Figure 4. 1
PTZ- General
55
Hide quick links:
Advertisement
Table of Contents
